Skip to Content
Automower® support
How to connect your Automower® robotic lawn mower to Wi-Fi
Wi-Fi connectivity allows you to monitor and control your Automower® remotely via the Automower® Connect app. For Wi-Fi-only models, it’s essential for EPOS® wire free navigation (via the Husqvarna Cloud) and firmware updates. This guide explains requirements, setup steps and best practices.
Automower® models by connectivity type
Show more
Wi-Fi-only models
These models connect to Husqvarna Cloud using only Wi-Fi:
Aspire™ R4
Automower® 320 NERA*
Automower® 305E NERA*
Automower® 310E NERA*
Aspire™ R6V*
Automower® 308V*
Automower® 312V*
*Can be upgraded with an Automower® Connect Kit (installed by a dealer) to add mobile connectivity. Read more about the Automower® Connect kit in this article.
Wi-Fi + mobile models
These models can use both Wi-Fi and mobile networks:
Automower® 430X NERA
Automower® 450X NERA
Automower® 405XE NERA
Automower® 410XE NERA
Automower® 405VE NERA
Automower® 410VE NERA
Automower® 430V NERA
Automower® 450V NERA
Mobile-only models
Automower® 435X AWD
Automower® 435X AWD NERA
Note: Other Automower® models do not have Wi-Fi hardware capability.
Wi-Fi requirements by installation type
When is Wi-Fi required
EPOS® installations via Husqvarna Cloud
Wi-Fi-only mowers: Require continuous Wi-Fi coverage across the entire work area to receive satellite correction data for navigation. Without Wi-Fi, these mowers cannot operate. Models equipped with AI vision technology switch to camera-guided navigation, continuing for up to 50 metres before stopping if Wi-Fi signal is not recovered.
Mowers with Wi-Fi + mobile: Can switch to mobile network if Wi-Fi is unavailable, ensuring continuous operation.
EPOS® installations with reference station
Wi-Fi is not required for mowing or navigation
Wi-Fi enables remote control via the app when mower is within range
Boundary wire installations
Wi-Fi is not required for mowing or navigation
Wi-Fi enables remote control via the app when mower is within range
Network requirements
Show more
Network requirements
Network visibility: SSID must be visible (not hidden)
Signal strength: Strong Wi-Fi signal at the charging station (Wi-Fi-only models)
Coverage area: For EPOS® via Husqvarna Cloud, full lawn coverage (Wi-Fi-only models)
Before you start
Install Automower® Connect app and login
Have Wi-Fi password ready
Place the mower near the router during setup
How to connect to Wi-Fi
Show more
Open the Automower® Connect app and log in.
Position the mower close to the router.
Navigate to: More > Settings > Automower® Connect
Enter your PIN code.
Under Wi-Fi, tap Select network
Choose your network and enter password
Tap Connect and wait for confirmation.
Managing multiple networks
Show more
Network storage capacity
Save up to 10 Wi-Fi networks to your account
Mower connects to one network at a time
Automatically connects to the strongest available saved network
To switch or remove networks, use the app settings
What happens when Wi-Fi connection is lost?
Show more
EPOS® installations via Husqvarna Cloud
Wi-Fi-only models: Stop mowing, search for signal, and display error message if connection is not recovered. Lose remote access via the app. Models equipped with AI vision technology switch to camera-guided navigation, continuing for up to 50 metres before stopping if Wi-Fi signal is not recovered.
Wi-Fi + mobile models: Switch to mobile network and continues operating
EPOS® installations with reference station
Wi-Fi-only models: Continue mowing according to schedule, but no remote access via the app
Wi-Fi + mobile models: Continue mowing, switch to mobile for remote access
Boundary wire installations
Wi-Fi-only models: Continue mowing according to schedule, but no remote access via the app
Wi-Fi + mobile models: Continue mowing, switch to mobile for remote access
Firmware updates (FOTA) and Wi-Fi requirements
Show moreFOTA (Firmware Over The Air) enables automatic firmware updates for Automower® to receive the latest features, improvements, and bug fixes.
Wi-Fi requirements for FOTA updates
Wi-Fi-only models: Must have strong Wi-Fi signal at the charging station. Updates cannot be installed without Wi-Fi connection.
Wi-Fi + mobile models: Can receive updates via mobile network if Wi-Fi is unavailable at the charging station.
When FOTA updates occur
Updates are downloaded when the mower is parked at the charging station
You’ll receive notifications in the Automower® Connect app about available and installed updates
Important: For Wi-Fi-only models, ensure consistent Wi-Fi coverage at the charging station location to receive firmware updates.
Troubleshooting connection issues
If you experience issues, see our dedicated guide: Troubleshooting Wi-Fi issues on Automower® robotic lawn mowersSee also: How to add an Automower® robotic lawn mower to Automower® Connect | What is FOTA (Firmware Over The Air)? | Is Automower® secure? Understanding connectivity and privacy