Skip to Content
Petrol-powered Brushcutter supportBrushcutter feeds too much cutting line
Petrol-powered Brushcutter support

Petrol-powered Brushcutter support

Brushcutter feeds too much cutting line

Try this solution

Properly attached guard

1
Install the cutting attachment guard (A) intended for operation with the trimmer head.

2
Hang the cutting attachment guard on the 2 hooks on the plate holder (B).

3
Bend the cutting attachment guard around the shaft and tighten the screw (C) on the opposite side of the shaft. Use the combination wrench to tighten the screw.

On this page