Can't start brushcutter

Try this solution

Check if there is fuel in the fuel tank

⚠️ CAUTION:

Small measurement errors can significantly affect the fuel mixture ratio, especially when preparing small quantities. Measure the oil carefully to ensure the correct mixture.
Only prepare the amount of fuel you expect to use. Unused fuel mixture should not be stored for more than 60 days.

Use a fuel mixture that is less than 60 days old and has one of the following oil-to-fuel ratios:

1:50 (2% oil in the fuel mixture) when using original Husqvarna two-stroke oil (recommended)
1:33 (3% oil in the fuel mixture) when using other brands of two-stroke oil

To prepare the fuel mixture:

1. Fill half the required amount of fuel into a clean fuel container with a sealing cap.

2. Add the full amount of oil.

3. Close the container and shake the mixture thoroughly.

4. Add the remaining amount of fuel.

5. Shake the fuel mixture carefully once again before use.

On this page