Skip to Content
Petrol-powered Leaf Blower
The engine doesn't start when it is hot
Try this solution
Use hot-start procedure
Hot-start procedures that work on most leaf blower models:
Hold the throttle wide open and pull the starter handle until the product coughs.
Pull the choke out and push it back in without touching the throttle. This will set the high idle and the product should start much easier.
Press the air purge repeatedly until fuel begins to fill the bulb. The bulb doesn't need to be completely filled. Push the choke in the closed position. Keep on pulling the cord powerfully until the engine starts. Once the engine starts, apply full throttle.
On this page