Zero Turn Mower support

Please refer to your operator's manual for guidance.

If your battery is too weak to start the engine, it should be recharged. (See the operator's manual for directions on charging the battery).

If "jumper cables" are used for emergency starting, follow this procedure:

IMPORTANT:
IF YOUR TRACTOR IS EQUIPPED WITH A 12 VOLT SYSTEM. THE OTHER VEHICLE MUST ALSO BE A 12 VOLT SYSTEM.

TO ATTACH JUMPER CABLES:

1. Connect one end of the RED cable to the POSITIVE (+) terminal of each battery, make sure these do not come in contact with ground.

2. Connect one end of the BLACK cable to the NEGATIVE (-) terminal of the fully charged battery.

3. Connect the remaining end of the BLACK cable to the chassis away from the fuel tank and battery.

TO REMOVE CABLES, REVERSE THE ORDER.